Supervision & technical support
Baril Coatings offers more than just
advice. We offer a total service solution to the principal, the architect, the
main contractor and the painting contractor.
In order to ensure the required
performance in terms of durability, Baril Coatings offers full technical
support and supervision during implementation and completion of the application
process, all in accordance with the Dutch national NPR 7452 guideline.
This service must be requested at
least one week before the start of the application process together with
submission of the recommendation provided with regard to the paint system.
After confirmation of the painting specifications recommendation, Baril
Coatings and the painting contractor agree on the criteria and items to be
reported as described below.
The report includes the following
descriptions and inspection results in accordance with Dutch national guideline
NPR 7452 chapter 7:
selection of pre-treatment method and correct execution
selection of application method and execution
application conditions
recommended coating system
type of climate at project location
Baril products used and related batch numbers
film thickness realized
number of measurements
nature of the object
principal
painting
contractor
Or section
e. Subject
and field of application
f. References
g. Conditions
for execution of the painting work
h. Painting
material
i. Execution
of the painting work
j. Inspection
of the painting work
k. Reference
areas
The supervision and support provided
by Baril Coatings does not relieve the painting contractor of his
responsibility for the work carried out by him. The painting contractor must
thoroughly familiarize himself with the most recently updated product data
sheets and the general terms and conditions of Baril Coatings B.V. for
protective coatings on steel. Baril Coatings Baril Coatings is not responsible
for application and the application conditions. The final durability depends
largely on factors that are outside our control and for that reason we cannot
accept any liability in that regard.
If all the requirements within the
painting specifications have been met, a warranty statement can be drawn up. Without
a copy of the inspection/supervision report, no warranty will be issued.
In case of any reclamation, it is important
to register the batch numbers of the relevant products. Without these
references, reclamations cannot be dealt with.
Parts of a project that are not
covered by the painting specification are excluded from any warranty.
